Amana Gas Range W10531343A Manuel d'utilisateur télécharger pdf (Page 8)

Surface Burners

IMPORTANT: Do not obstruct the flow of combustion and

ventilation air around the burner grate edges.

Burner cap: Always keep the burner cap in place when using a

surface burner. A clean burner cap will help avoid poor ignition

and uneven flames. Always clean the burner cap after a spillover

and routinely remove and clean the caps and bases according to

the “General Cleaning” section.

Gas tube opening: Gas must flow freely throughout the gas tube

opening for the burner to light properly. Keep this area free of soil

and do not allow spills, food, cleaning agents or any other

material to enter the gas tube opening. Keep spillovers out of the

gas tube by always using a burner cap.

Burner ports: Check burner flames occasionally for proper size

and shape as shown above. A good flame is blue in color, not

yellow. Keep this area free of soil and do not allow spills, food,

cleaning agents or any other material to enter the burner ports.

To Clean:

IMPORTANT: Before cleaning, make sure all controls are off and

the oven and cooktop are cool. Do not use oven cleaners, bleach

or rust removers.

1. Remove the surface burner grates.

2. Remove burner cap from the burner base and clean

according to “General Cleaning” section.

3. Clean the gas tube opening with a damp cloth.

4. Clean clogged burner ports with a straight pin as shown. Do

not enlarge or distort the port. Do not use a wooden

toothpick. If the burner needs to be adjusted, contact a

trained repair specialist.

5. Replace the burner cap onto the burner base, making sure

the alignment pins are properly aligned with the burner cap.

6. Replace surface burner grates.

7. Turn on the burner. If the burner does not light, check cap

alignment. If the burner still does not light, do not service the

burner yourself. Contact a trained repair specialist.

Home Canning

When canning for long periods, alternate the use of surface

burners between batches. This allows time for the most recently

used areas to cool.

■ Center the canner on the grate above the burner.

■ Do not place canner on 2 surface burners at the same time.

■ For more information, contact your local agricultural

department. Companies that manufacture home canning

products can also offer assistance.

Cookware

IMPORTANT: Do not leave empty cookware on a hot surface

cooking area, element or surface burner.

Ideal cookware should have a flat bottom, straight sides and a

well-fitting lid, and the material should be of medium-to-heavy

thickness.

Rough finishes may scratch the cooktop or grates. Aluminum and

copper may be used as a core or base in cookware. However,

when used as a base they can leave permanent marks on the

cooktop or grates.

Cookware material is a factor in how quickly and evenly heat is

transferred, which affects cooking results. A nonstick finish has

the same characteristics as its base material. For example,

aluminum cookware with a nonstick finish will take on the

properties of aluminum.

Cookware with nonstick surfaces should not be used under the

broiler.

A. Burner cap (underside)

B. Alignment pins

C.Igniter

D. Burner base

E. Gas tube opening

A. 1-1½" (2.5-3.8 cm)

B. Burner ports

A. Incorrect

B. Correct

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Commentaires sur ces manuels

Pas de commentaire

Amana Gas Range W10531343A Manuel d'utilisateur Page 8

Commentaires sur ces manuels

Produits connexes et manuels pour Radio Amana Gas Range W10531343A