Amana AWO6317SFS Manuel d'installation télécharger pdf (Page 6)

3. Grasp the edges of the oven door with both hands and close

the oven door until it will no longer close. Lift and pull oven

door toward you and remove. Set the oven door(s) aside on

a covered work surface.

INSTALLATION INSTRUCTIONS

Prepare Built-In Oven

1. Decide on the nal location for the oven. Avoid drilling or

cutting into house wiring during installation.

2. To avoid oor damage, set the oven onto cardboard prior

to installation. Do not use handle or any portion of the front

frame for lifting.

3. Remove the shipping materials and tape from the oven.

4. Remove the hardware package from inside the bag

containing literature.

5. Remove and set aside racks and other parts from inside

the oven.

6. If installing a single oven below a cooktop, remove the

adhesive backing from the foam strip and press it to the

back of the control panel.

NOTE: When the cooktop is installed in the cabinet, the top

edge of the foam strip should be approximately ³⁄8" (10 mm)

from the top edge of the control panel. Make sure the foam

strip is positioned against the cabinet face.

7. Move oven and cardboard close to the oven’s nal location.

WARNING

Excessive Weight Hazard

Use two or more people to move and install oven.

Failure to do so can result in back or other injury.

Remove Oven Door(s)

IMPORTANT: Use both hands to remove oven doors.

1. Open the oven door.

2. Locate the oven door latches in both corners of the oven

door, and rotate the latches forward to the unlocked

position.

A. Oven door latch in locked

position

B. Oven door latch in unlocked

position

A. Foam strip

1 2 3 4 5 6 7 8 9 10 11 ... 27 28

Pas de commentaire

Amana AWO6317SFS Manuel d'installation Page 6